- Traditional CC Shape, Robust Tiger-Tuff Pedigree
- Thick Walls, Corners and Front Lip for Long Life
- Excellent Impact and Abrasion Resistance
- Up to 30,000 BPH in a Single Row
Contact a sales rep
- Overview
- Size Chart
- Size Chart (Low Profile)
- Uses
- Materials
- Venting
- Media / Literature
The Tiger-CC-Maximum Duty Elevator Bucket combines the performance of the traditional CC elevator bucket with resilience of the Tiger-Tuff resulting in increased bucket life with less breakage and more capacity. Tiger-CC is perfect for ship and barge loaders, unit train facilities and high throughput crushing operations
Minimum spacing is nominal projection plus 1”. The recommended belt width for a single row of buckets is actual bucket width plus 2″.
Tiger-CC Low Profile Option
A reduced height for closer vertical spacing allows more buckets per foot of elevator belt. When upgrading to Tiger-CC Low Profile buckets, horsepower requirements must be evaluated due to increased capacity.
Other Considerations
DRILLING: Elevator buckets are manufactured without a drill pattern. Special drilling or punching can be accommodated upon customer request.
VENTING: Available as needed. See venting options in our catalog.
DIGGER BUCKETS: Use slightly larger metal digger elevator buckets to help loosen material in the elevator boot section that has set up or hardened, thereby reducing abrasion on the plastic buckets. Call for details on Metal Digger elevator bucket options.
SPACING: See elevator bucket spacing details in the size chart (depending on materials and speeds, smaller and larger spacing may be used).
INSTALLATION: Use a #1 standard elevator bolt or Sabre-Tooth elevator bolt for installation. Designed to be used with fender or flat and lock washers and hex or locking nuts. If buckets are being installed on chain, use hex head bolts, nuts and washers.
FDA: Both the urethane and polyethylene are designed to FDA specifications for direct contact with food products.
Tiger-CC Size Chart
| BUCKET SIZE | PUNCHING | WEIGHT, LBS. | CAPACITY, CU. IN. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bucket Size | Length | Projection | Depth | Back Wall Thickness | Centers | # of Holes | Bolt Size | Top Down | HDPE | Nylon | Urethane | Water Level | Water Level +10% | Std Spacing | |||
| in. | mm | in. | mm | in. | mm | ||||||||||||
| 10 x 7 | 10-7/8 | 276 | 8-1/8 | 206 | 6-7/8 | 174 | 0.50 | 4-1/8 | 3 | 5/16 | 2-3/16 | 3.60 | 3.60 | 3.60 | 217 | 239 | 8 |
| 11 x 7 | 11-7/8 | 301 | 8-1/8 | 206 | 6-7/8 | 174 | 0.50 | 3 | 4 | 5/16 | 2-3/16 | 3.85 | 3.85 | 3.85 | 236 | 260 | 8 |
| 12 x 7 | 12-7/8 | 327 | 8-1/8 | 206 | 6-7/8 | 174 | 0.50 | 3-3/8 | 4 | 5/16 | 2-3/16 | 4.04 | 4.04 | 4.04 | 258 | 284 | 8 |
| 13 x 7 | 13-7/8 | 352 | 8-1/8 | 206 | 6-7/8 | 174 | 0.50 | 3-5/8 | 4 | 5/16 | 2-3/16 | 4.30 | 4.30 | 4.30 | 300 | 330 | 8 |
| 14 x 7 | 14-7/8 | 377 | 8-1/8 | 206 | 6-7/8 | 174 | 0.50 | 3 | 5 | 5/16 | 2-3/16 | 4.54 | 4.54 | 4.54 | 313 | 344 | 8 |
| 15 x 7 | 15-7/8 | 403 | 8-1/8 | 206 | 6-7/8 | 174 | 0.50 | 3-1/4 | 5 | 5/16 | 2-3/16 | 4.78 | 4.78 | 4.78 | 339 | 373 | 8 |
| 16 x 7 | 16-7/8 | 428 | 8-1/8 | 206 | 6-7/8 | 174 | 0.50 | 2-7/8 | 6 | 5/16 | 2-3/16 | 4.99 | 4.99 | 4.99 | 352 | 387 | 8 |
| 12 x 8 | 12-7/8 | 327 | 9-1/4 | 235 | 8-7/8 | 225 | 0.55 | 3-3/8 | 4 | 5/16 | 2 | 4.90 | – | – | 366 | 403 | 9 |
| 14 x 8 | 14-7/8 | 377 | 9-1/4 | 235 | 8-7/8 | 225 | 0.55 | 3 | 5 | 5/16 | 2 | 5.40 | 6.17 | – | 430 | 473 | 9 |
| 16 x 8 | 16-7/8 | 428 | 9-1/4 | 235 | 8-7/8 | 225 | 0.55 | 2-7/8 | 6 | 5/16 | 2 | 5.90 | 6.78 | 6.78 | 510 | 561 | 9 |
| 18 x 8 | 18-7/8 | 479 | 9-1/4 | 235 | 8-7/8 | 225 | 0.55 | 3-1/8 | 6 | 5/16 | 2 | 6.60 | 7.70 | – | 560 | 616 | 9 |
| 20 x 8 | 20-7/8 | 530 | 9-1/4 | 235 | 8-7/8 | 225 | 0.55 | 3-1/2 | 6 | 5/16 | 2 | 7.20 | 8.15 | – | 655 | 720 | 9 |
| 18 x 10 | 19 | 481 | 11-1/2 | 292 | 10-3/8 | 264 | 0.70 | 3-1/8 | 6 | 3/8 | 2-1/4 | 11.56 | 11.56 | – | 915 | 1005 | 11 |
| 20 x 10 | 21 | 533 | 11-1/2 | 292 | 10-3/8 | 264 | 0.70 | 3-1/2 | 6 | 3/8 | 2-1/4 | 12.20 | 14.20 | – | 1005 | 1106 | 11 |
| 22 x 10 | 23 | 584 | 11-1/2 | 292 | 10-3/8 | 264 | 0.70 | 4 | 6 | 3/8 | 2-1/4 | 13.00 | 14.30 | – | 1105 | 1216 | 11 |
| 23 x 10 | 24 | 609 | 11-1/2 | 292 | 10-3/8 | 264 | 0.70 | 3-3/8 | 7 | 3/8 | 2-1/4 | 13.50 | – | – | 1155 | 1274 | 11 |
| 24 x 10 | 25 | 635 | 11-1/2 | 292 | 10-3/8 | 264 | 0.70 | 3-1/2 | 7 | 3/8 | 2-1/4 | 14.00 | 16.23 | – | 1206 | 1327 | 11 |
| 25 x 10 | 26 | 660 | 11-1/2 | 292 | 10-3/8 | 264 | 0.70 | 3-5/8 | 7 | 3/8 | 2-1/4 | 14.40 | – | – | 1256 | 1381 | 11 |
| 26 x 10 | 27 | 685 | 11-1/2 | 292 | 10-3/8 | 264 | 0.70 | 3-7/8 | 7 | 3/8 | 2-1/4 | 14.80 | 17 | – | 1306 | 1437 | 11 |
| 28 x 10 | 29 | 737 | 11-1/2 | 292 | 10-3/8 | 264 | 0.70 | 3-5/8 | 8 | 3/8 | 2-1/4 | 15.80 | 18.13 | – | 1400 | 1540 | 11 |
| 18 x 12 | 19 | 481 | 13-1/2 | 343 | 12-1/8 | 308 | 0.75 | 3-1/8 | 6 | 3/8 | 2-1/8 | 16.20 | 18.80 | – | 1222 | 1344 | 13 |
| 20 x 12 | 21 | 533 | 13-1/2 | 343 | 12-1/8 | 308 | 0.75 | 3-1/2 | 6 | 3/8 | 2-1/8 | 17.60 | 20.40 | – | 1365 | 1502 | 13 |
| 22 x 12 | 23 | 584 | 13-1/2 | 343 | 12-1/8 | 308 | 0.75 | 4 | 6 | 3/8 | 2-1/8 | 18.80 | 21.80 | – | 1508 | 1659 | 13 |
| 24 x 12 | 25 | 635 | 13-1/2 | 343 | 12-1/8 | 308 | 0.75 | 3-1/2 | 7 | 3/8 | 2-1/8 | 19.70 | 22.90 | – | 1652 | 1817 | 13 |
Tiger-CC (Low Profile)
| 8 | PUNCHING | WEIGHT, LBS. | CAPACITY, CU. IN. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bucket Size | Length | Projection | Depth | Back Wall Thickness | Centers | # of Holes | Bolt Size | Top Down | HDPE | Nylon | Urethane | Water Level | Water Level +5% | Std Spacing | |||
| in. | mm | in. | mm | in. | mm | ||||||||||||
| 10 x 7 | 10-7/8 | 276 | 8-1/8 | 206 | 5-3/4 | 146 | 0.50 | 4-1/8 | 3 | 5/16 | 1 | 3.08 | – | – | 217 | 228 | 6 |
| 11 x 7 | 11-7/8 | 301 | 8-1/8 | 206 | 5-3/4 | 146 | 0.50 | 3 | 4 | 5/16 | 1 | 3.35 | – | – | 236 | 248 | 6 |
| 12 x 7 | 12-7/8 | 327 | 8-1/8 | 206 | 5-3/4 | 146 | 0.50 | 3-3/8 | 4 | 5/16 | 1 | 3.56 | – | – | 258 | 271 | 6 |
| 13 x 7 | 13-7/8 | 352 | 8-1/8 | 206 | 5-3/4 | 146 | 0.50 | 3-5/8 | 4 | 5/16 | 1 | 3.75 | – | – | 300 | 315 | 6 |
| 14 x 7 | 14-7/8 | 377 | 8-1/8 | 206 | 5-3/4 | 146 | 0.50 | 3 | 5 | 5/16 | 1 | 4.02 | – | – | 313 | 329 | 6 |
| 15 x 7 | 15-7/8 | 403 | 8-1/8 | 206 | 5-3/4 | 146 | 0.50 | 3-1/4 | 5 | 5/16 | 1 | 4.22 | – | – | 339 | 356 | 6 |
| 16 x 7 | 16-7/8 | 428 | 8-1/8 | 206 | 5-3/4 | 146 | 0.50 | 2-7/8 | 6 | 5/16 | 1 | 4.43 | – | – | 352 | 370 | 6 |
| 12 x 8 | 12-7/8 | 327 | 9-1/4 | 235 | 6-3/4 | 171 | 0.55 | 3-3/8 | 4 | 5/16 | 1 | 4.20 | – | – | 366 | 384 | 7 |
| 14 x 8 | 14-7/8 | 377 | 9-1/4 | 235 | 6-3/4 | 171 | 0.55 | 3 | 5 | 5/16 | 1 | 4.80 | – | – | 430 | 452 | 7 |
| 16 x 8 | 16-7/8 | 428 | 9-1/4 | 235 | 6-3/4 | 171 | 0.55 | 2-7/8 | 6 | 5/16 | 1 | 5.20 | – | – | 510 | 536 | 7 |
| 18 x 8 | 18-7/8 | 479 | 9-1/4 | 235 | 6-3/4 | 171 | 0.55 | 3-1/8 | 6 | 5/16 | 1 | 5.70 | – | – | 560 | 588 | 7 |
| 20 x 8 | 20-7/8 | 530 | 9-1/4 | 235 | 6-3/4 | 171 | 0.55 | 3-1/2 | 6 | 5/16 | 1 | 6.30 | 7.13 | 8.38 | 655 | 688 | 7 |
| 18 x 10 | 19 | 481 | 11-1/2 | 292 | 8-3/4 | 222 | 0.70 | 3-1/8 | 6 | 3/8 | 1 | – | – | – | 915 | 960 | 9 |
| 20 x 10 | 21 | 533 | 11-1/2 | 292 | 8-3/4 | 222 | 0.70 | 3-1/2 | 6 | 3/8 | 1 | 11.10 | – | – | 1005 | 1055 | 9 |
| 22 x 10 | 23 | 584 | 11-1/2 | 292 | 8-3/4 | 222 | 0.70 | 4 | 6 | 3/8 | 1 | 12.00 | – | – | 1105 | 1160 | 9 |
| 23 x 10 | 24 | 609 | 11-1/2 | 292 | 8-3/4 | 222 | 0.70 | 3-3/8 | 7 | 3/8 | 1 | 12.40 | – | – | 1155 | 1213 | 9 |
| 24 x 10 | 25 | 635 | 11-1/2 | 292 | 8-3/4 | 222 | 0.70 | 3-1/2 | 7 | 3/8 | 1 | 12.80 | – | – | 1206 | 1266 | 9 |
| 25 x 10 | 26 | 660 | 11-1/2 | 292 | 8-3/4 | 222 | 0.70 | 3-5/8 | 7 | 3/8 | 1 | 13.20 | – | – | 1256 | 1318 | 9 |
| 26 x 10 | 27 | 685 | 11-1/2 | 292 | 8-3/4 | 222 | 0.70 | 3-7/8 | 7 | 3/8 | 1 | 13.60 | – | – | 1306 | 1371 | 9 |
| 28 x 10 | 29 | 737 | 11-1/2 | 292 | 8-3/4 | 222 | 0.70 | 3-5/8 | 8 | 3/8 | 1 | 14.50 | – | – | 1400 | 1470 | 9 |
| 18 x 12 | 19 | 481 | 13-1/2 | 343 | 10 | 254 | 0.75 | 3-1/8 | 6 | 3/8 | 1-1/4 | 14.50 | – | – | 1222 | 1283 | 11 |
| 20 x 12 | 21 | 533 | 13-1/2 | 343 | 10 | 254 | 0.75 | 3-1/2 | 6 | 3/8 | 1-1/4 | 15.80 | – | – | 1365 | 1433 | 11 |
| 22 x 12 | 23 | 584 | 13-1/2 | 343 | 10 | 254 | 0.75 | 4 | 6 | 3/8 | 1-1/4 | 16.80 | – | – | 1508 | 1584 | 11 |
| 24 x 12 | 25 | 635 | 13-1/2 | 343 | 10 | 254 | 0.75 | 3-1/2 | 7 | 3/8 | 1-1/4 | 17.60 | – | – | 1652 | 1734 | 11 |
Recommended Uses
(Recommended but not restricted to handling these specific products)
Barley
Brown Sugar
Coffee
Corn
Feed
Flour
Grain
Grass Seed
Meat Scap
Nuts
Oats
Pellets
Rice
Salt
Soy Beans
Sugar
Sunflower Seeds
Wheat
Poly
Application:
Grains & Food Products Temperature
Range:
-60F to +180F(210F intermittent)
FDA Approved Material:
Yes
Comments:
Economical, high density polyethylene. FDA approved material for handling food grade products.
Nylon
Application:
Hot, high impact, abrasive dense products
Range:
-60°F to +300°F (350°F intermittent)
FDA Approved Material:
No
Comments:
Best for high heat applications, with tough impact and abrasion needs.
Urethane
Application:
Heavy, abrasion, sticky materials
Range:
-60F to +180F(210F intermittent)
FDA Approved Material:
Yes
Comments:
Most flexible and abrasion resistant. Resists product sticking and sharp cutting particles.
FDA Nylon
Application:
Hot, high impact, abrasive food grade products
Range:
-60F to +300F
FDA Approved Material:
Yes
Comments:
Best for high heat food grade applications, with tough impact and abrasion needs.
Venting an elevator bucket aids in bucket fill and discharge with light, fluffy materials.
Lightweight, fluffy materials, those that are extremely dense or flow poorly can be difficult to handle in bucket elevators at high speeds. Because these materials tend to trap air when being handled by an elevator bucket, venting provides air relief to assist in their filling and discharge. Commodities for venting include flours, meals, feed mash, DDG’s or screenings. As these materials enter the bucket, air is released through a series of vent holes in the bottom of the bucket allowing for a more complete fill. These vent holes also allow air to re-enter the bucket, which facilitates full release of product into the discharge.
Standard hole diameter is equal to the size of the bolt mounting holes in vent pattern #1, all other vent patterns will have 11/32” diameter holes unless otherwise requested by the customer.
ADDITIONAL SPECIAL DRILLING AND VENTING CHARGES
- Drilling any diameter hole over 13/32″
- Bolt Hole centers closer than 1-3/4″
- Side drilled buckets except standard peanut buckets
- Special Venting requirements such as extra holes, change in hole diameter, etc.
- Quoted prices subject to change due to special drilling and venting requirements
#1 Vent
Same holes in body as bolt mounting holes.
#2 Vent
One row of holes on 1-1/8″centers
#3 Vent
Two rows of holes on 1-1/8″centers.
#4 Vent
Same as #3, plus three holes in each end cap.
Custom Vent
Vented as required.
Please call for guidance on bucket venting.
Complete Catalog
Agricultural Catalog
Tiger-CC
Comprehensive Line Cards
Tiger-CC Agricultural Buckets
Classic CC Style That’s Tough as a Tiger
Tiger-CC is the agriculture industry’s best Maximum-Duty CC-Style bucket. What makes TIger-CC different?
Buckets, Belting, Splices & Bolts all in one!
Complete your Build
A single shipment, on a single invoice, from a single source: Maxi-Lift. For a limited time only, Maxi-Lift is offering 3% OFF on new bundle orders. Contact us today or call (800) 527-0657 for more information!
Learn More
Contact a Sales Rep
Bo Fisher
VP of North American Sales
Sonya Fisher
Inside Sales
Eivind Flores
Inside/International Sales
Carlos Camiciottoli
Central America & Mexico
Matt Porter
Technical Sales Specialist
Drew Lassiter
Business Development Specialist
Dean Wedekind
Technical Sales Specialist
Adriel Sastre
Inside Sales
Lesly Solorzano
Inside Sales
Subscribe
Join our mailing list to stay up to date with what is happening at Maxi-Lift, Inc.
